Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

Na2S–Carbon Nanotube Fabric Electrodes for Room‐Temperature Sodium–Sulfur Batteries

A unique sodium sulfide (Na₂S) cathode is developed, which will allow the use of sodium‐free anodes for room‐temperature sodium–sulfur (Na–S) batteries. To overcome the “inert” nature of the Na₂S, a special cathode structure is developed by spreading the multi‐walled carbon nanotube (MWCNT)‐wrapped Na₂S particles onto MWCNT fabrics. Spectroscopic and electrochemical analyses reveal a series of polysulfide intermediates involved in the charge/discharge of the cell. The Na–S battery prepared in full discharge state with the Na₂S/MWCNT cathode provides a remarkable capacity of 500 A h kg^?1 (based on sulfur mass) after 50 cycles.     

High-temperature fluorescence of low- and high concentration aqueous ATP solution

Abstract

The results of an experimental study of luminescence of an aqueous solution of adenosine triphosphate (ATP) at room temperature are presented. High-temperature fluorescence of low- and high-concentrated solution was experimentally detected and analyzed. The shape of the fluorescence spectrum, the excited state lifetime and the temperature behavior of the emission intensity indicate the formation in the high-concentrated solution of rather stable dimer-like complexes, which can form excimer states.     

Generating Artificial Reverberation via Genetic Algorithms for Real-Time Applications

We introduce a Virtual Studio Technology (VST) 2 audio effect plugin that performs convolution reverb using synthetic Room Impulse Responses (RIRs) generated via a Genetic Algorithm (GA). The parameters of the plugin include some of those defined under the ISO 3382-1 standard (e.g., reverberation time, early decay time, and clarity), which are used to determine the fitness values of potential RIRs so that the user has some control over the shape of the resulting RIRs. In the GA, these RIRs are initially generated via a custom Gaussian noise method, and then evolve via truncation selection, random weighted average crossover, and mutation via Gaussian multiplication in order to produce RIRs that resemble real-world, recorded ones. Binaural Room Impulse Responses (BRIRs) can also be generated by assigning two different RIRs to the left and right stereo channels. With the proposed audio effect, new RIRs that represent virtual rooms, some of which may even be impossible to replicate in the physical world, can be generated and stored. Objective evaluation of the GA shows that contradictory combinations of parameter values will produce RIRs with low fitness. Additionally, through subjective evaluation, it was determined that RIRs generated by the GA were still perceptually distinguishable from similar real-world RIRs, but the perceptual differences were reduced when longer execution times were used for generating the RIRs or the unprocessed audio signals were comprised of only speech.     

室温铁磁性Sr3YCo4O10.5+δ多晶有序化的烧结工艺及电磁性能

采用固相反应法制备了不同烧结温度(950~1 180 ℃)、烧结时间、烧结次数共7种工艺的Sr₃YCo₄O_10.5+δ多晶块材,通过热分析、XRD、SEM确定了有序化相变和最佳烧结工艺(1 180 ℃/24 h+1 180 ℃/24 h),并研究了多晶的电磁性能。结果表明,964 ℃完全晶化的四方相Sr₃YCo₄O_10.5在1 042 ℃吸氧(δ)完成有序化,生成Sr₃YCo₄O_10.5+δ,而1 100 ℃和1 180 ℃烧结的样品均出现(103)、(215)超结构峰,验证了其结构的有序性。块材均呈半导体电输运行为,二次烧结晶格完整性提高,晶粒长大,300 K时电阻率仅为0.06 Ω·cm,居里温度(T_c)~335 K,零场冷曲线(ZFC)上的Hopkinson峰源于低温时被冻结的磁矩随温度升高转向磁场方向,磁化强度在298 K达到最大,随后受热扰动的影响减小。室温铁磁性源于有序结构导致的中自旋或高自旋态Co³⁺的e_g轨道有序。     

Influence of staff number and internal constellation on surgical site infection in an operating room

Prediction of bacteria-carrying particle （BCP） dispersion and particle distribution released from staffmem- bers in an operating room （OR） is very important for creating and sustaining a safe indoor environment. Postoperative wound infections cause significant morbidity and mortality, and contribute to increased hospitalization time. Increasing the number of personnel within the OR disrupts the ventilation airflow pattern and causes enhanced contamination risk in the area of an open wound. Whether the amount of staffwithin the OR influences the BCP distribution in the surgical zone has rarely been investigated. This study was conducted to explore the influence of the number of personnel in the OR on the airflow field and the BCP distribution. This was performed by applying a numerical calculation to map the airflow field and Lagrangian particle tracking （LPT） for the BCP phase. The results are reported both for active sampling and passive monitoring approaches. Not surprisingly, a growing trend in the BCP concentration （cfu/ms） was observed as the amount of staff in the OR increased. Passive sampling shows unpredictable results due to the sedimentation rate, especially for small particles （5-10 i~m）. Risk factors for surgical site infections （SSls） must be well understood to develop more effective prevention programs.     

简便的双环化反应合成3,7-二甲基-4a,16-二羟基-1H-苯并[5,6]茚并[2,1-1]氧杂蒽-1,9-二酮化合物及其结构表征

标题化合物C26H26O5以2,3-萘二甲醛和5-甲基-1,3-环己二酮为原料,在醋酸溶剂中,室温下经搅拌多组分一锅法合成得到.其结构通过单晶X-射线衍射法确定,晶体属单斜晶系,空间群P21,相对分子质量Mr=418.47,晶胞参数a=0.990 04(8) nm,b=1.090 98(9)nm,c=1.042 46(11) nm,V=1.087 53(17) nm3,Z=2,晶胞密度Dc=1.278 g/cm3,吸收系数μ=0.088mm-1,单胞中电子的数目F(000) =444.晶体结构用直接法解出,经全矩阵最小二乘法对原子参数进行修正,最终的偏离因子为R1 =0.053 3,wR2=0.129 3.在晶体结构中新形成的吡喃环为半椅式构象,而茚中五元环则为信封式构象.     

Void‐Assisted Ion‐Paired Proton Transfer at Water–Ionic Liquid Interfaces

At the water–trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P_14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H⁺) and deuterium ions (D⁺) was identified. Alkali metal cations (such as Li⁺, Na⁺, K⁺) did not undergo this transfer. H⁺/D⁺ transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP]^?, resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton‐coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.     

硫鸟嘌呤修饰的Mn:ZnS QDs磷光探针检测铂(Ⅲ)

通过水相合成法制备了硫鸟嘌呤(TG)修饰的锰掺杂硫化锌量子点(TG-Mn:ZnS QDs)。加入Pt⁴⁺后,Pt⁴⁺会与硫鸟嘌呤上的氮原子结合形成N-Pt⁴⁺配位结构附着在TG-Mn:ZnS QDs的表面,随着Pt⁴⁺浓度的增加,TG-Mn:ZnS QDs-Pt⁴⁺体系发生电子转移而导致磷光逐渐被猝灭,基于此构建了检测Pt⁴⁺的磷光探针。实验中考察了p H、时间对Pt⁴⁺猝灭TG-Mn:ZnS QDs磷光强度的影响。在最佳实验条件下,Pt⁴⁺浓度在0.06~2.4μg/mL范围内与TG-Mn:ZnS QDs的磷光强度呈良好的线性关系y=0.0884x+0.2319,R²=0.991,方法检出限(3σ/n)为1.3μg/mL。该磷光探针适用于实际样品中Pt⁴⁺含量的测定。